HORNER - SUREGRIP INSTRUCTION MANUAL
Before attaching your handpiece to any driveshaft,
double-check that the shearing machine you’re about to
attach your handpiece to is switched off.
Locate the correct end of your driveshaft and push the back
spindle of your handpiece onto the driveshaft firmly.
Lock the handpiece back on itself as shown in the illustration
below when attaching it to the driveshaft.
For Pin Drive Handpieces
Rotate clockwise. Once you feel the handpiece locate into the
bayonet, rotate another full turn.
For Worm Drive Handpieces
Rotate clockwise until the handpiece and driveshaft are tight
together.
LONGHORN
ATTACHING HANDPIECE TO DRIVE
11
