Before any programming can commence ensure that all locomotives are removed from the track, apart from the
one to be coded with an alternative number (eg. No.1). Should any point decoders be connected to the track
ensure that they are also disconnected as well.
All locomotives are coded as No. 3 at the factory. To change the code from No. 3 to No. 1 (for example) the
following steps must be taken.
1.
Place the locomotive you wish to program on the track.
2.
Press and hold the “SELECT” button for 2 seconds. The LCD display will flash “LA” (Locomotive Address).
3.
Press button
on the unit keypad. The LCD display will flash “1”.
4.
Press the “SELECT” button again to save the new locomotive address.The red LED will flash up to seven times
during which the decoder will be accepting the command. If the LED flashes eight times, it is advisable to
reprogramme the Decoder again.
5.
The locomotive is now programmed as No. 1.
1
All Digital locomotives included in Hornby Digital sets are factory fitted with Decoders. These Decoders are
programmed No. 3 as standard (default).
1.
Place a locomotive on the track.
2.
‘03’ will automatically be shown on the LCD (Liquid Crystal Display).
3.
Turn the Control Knob on the
Select
clockwise until the locomotive has reached the desired speed.
4.
To slow down and stop the locomotive, turn the Control Knob anti-clockwise.
Direction of travel is controlled using the Direction arrows on the unit keypad.The currently selected direction
is indicated by a green LED (Light Emmiting Diode) below the button.
5.
To change the direction of the locomotive, press the opposite direction button to the one currently selected.
IT IS RECOMMENDED YOU STOP THE LOCOMOTIVE BEFORE CHANGING DIRECTION.
Second Loco Programming
Quick Start
For more information visit:
www.hornby.com
Please Note:
During the start-up sequence of the
Select
, the LCD will briefly display the numbers 10 and 30 before
displaying the default address 03. This is a system check for the
Select
, to ensure the unit is functioning
correctly.
6
7
