LED Indication
For more information visit:
www.hornby.com
Power “On” indicator.
Green LED:
Track output short circuit indicator. This light will
indicate that there is either a short circuit or that
the current is over 3 amps. When the red LED
illuminates and the power is cut, switch off the unit
and find the source of the “short”. Once identified,
correct and then switch on. This unit will have
automatically reset itself.
Red LED:
This is a reverse current indicator which is functional
when the Booster is used for Reverse loops or Wye
track configurations. When the track output signal
is reversed from the input signal the yellow LED will
light. Should both the signals be of the same phase
then the yellow LED will not be lit.
Yellow LED:
5
Survolteur DCC
