manualshive.com logo in svg

Horizon Hobby F-15 Eagle, Инструкция по эксплуатации

Поделиться
Скачать
Horizon Hobby F-15 Eagle Скачать руководство пользователя страница 6

EN

6

F-15 Eagle 64 mm

Horizontal Stabilizer Installation

1.  Apply regular, (not Foam Safe) medium CA to the base of the 

horizontal stabilizer where it meets the fuselage.

2. Make sure the control horn faces down toward the bottom and fi t 

each horizontal stabilizer to the fuselage.

IMPORTANT!

 Make sure the horizontal stabilizer is in alignment with 

the wing. Adjust as necessary before the CA fully cures.

Vertical Stabilizer Installation

1.  Apply medium CA to the base of the vertical stabilizers 

where they meet the fuselage.

2. Fit the vertical stabilizer in place on the fuselage. Make 

sure the vertical stabilizers are straight up and down and 
point straight.

3. On each side, attach the Z-bend of the elevator linkage to the center 

hole of the servo arm then attach the clevises to the outer hole of 
the elevator control horns. Slide the clevis retainer tube over the 
clevis to lock in place.

IMPORTANT!

 Adjust each pushrod clevis to make sure the travel of 

both elevators match and are centered.

Model Assembly 

Continued

Center

Center

Hole

Hole

Outer

Outer

Hole

Hole

Содержание F-15 Eagle





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды