EN
11
Power Components Service
Disassembly
CAUTION:
DO NOT handle the propeller while the
flight battery is connected to the ESC. Personal
injury could result.
Propeller
1. Using a Phillips screwdriver, carefully remove the
2mm x 6mm self tapping screw
(A)
and propeller
(B)
from the motor shaft.
Assembly
Assemble in reverse order.
• Connect the motor wire connector to the ESC/receiver.
• The propeller size numbers (5.75 x 2.5) must face
forward for correct propeller operation.
• Ensure the propeller adapter and motor mount are fully
connected to the motor.
Motor
1. Remove the battery hatch by gripping the front of the
hatch, then pulling it up and away from the fuselage.
2. Disconnect the motor wire connector from the ESC/
receiver connector.
3. Using a Phillips screwdriver, remove the 2 x 12 mm
screw
(C)
and motor
(D)
from the motor mount.
4. Remove the three 1mm x 3mm screws
(E)
and the prop
adapter
(F)
from the motor. The motor magnet may
attract screws to the motor.
D
C
F
E
A
B
