INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
&
MAINTENANCE
LIMITED
W
ARRANTY
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
Open
HARDWARE BAG 1
.
Attach
UPPER PULLEY
ASSEMBLY
to
CENTER
SUPPORT FRAME
using 2
BOLTS (D)
, 4
FLAT
WASHERS
(B)
and 2
NYLON NUTS (C)
.
Tighten this hardware.
Position
LAT BAR BRACKET
ASSEMBLY
in line with the
UPPER PULLEY ASSEMBLY
and the
LEFT SUPPORT
FRAME
and
RIGHT SUPPORT
FRAME
as shown. Using 4
BOLTS (A)
, 8
FLAT WASHERS
(B)
and 4
NYLON NUTS
(C)
attach
SUPPORT PLATES
,
LAT
BAR BRACKET ASSEMBLY
and
UPPER PULLEY ASSEMBLY
to
the
LEFT SUPPORT FRAME
and
RIGHT SUPPORT FRAME
as
shown.
A
B
C
ASSEMBLY
STEP 2
NYLON NUT (C)
Qty: 6
FLAT WASHER (B)
Qty: 12
BOLT (A)
Qty: 4
BOLT (D)
Qty: 2
SUPPORT PLATE
Qty: 2
HARDWARE BAG 1 CONTENTS :
LAT BAR
BRACKET ASSEMBLY
UPPER PULLEY ASSEMBLY
FLAT WASHER (B)
NYLON NUT (C)
FLAT WASHER (B)
BOLT (A)
FLAT WASHER (B)
BOLT (D)
FLAT WASHER (B)
NYLON NUT (C)
SUPPORT PLATE
LEFT SUPPORT
FRAME
RIGHT
SUPPORT
FRAME
CENTER
SUPPORT
FRAME
Open
HARDWARE BAG 2
.
Attach
SEAT WELDMENT SET
.
Attach
COVER
to bolted joint using 4
SCREWS (F)
.
Remove
STOPPER
from front side of
RADIAL ARM ASSEMBLY
and reinstall on back side of
RADIAL ARM ASSMBLY
.
Attach
RADIAL ARM ASSEMBLY
to
CENTER SUPPORT FRAME
using 2
BOLTS (A),
4
FLAT
WASHERS (B)
and
2
NYLON NUTS (C)
.
A
B
C
D
E
ASSEMBLY
STEP
NYLON NUT (C)
Qty: 2
FLAT WASHER (B)
Qty: 4
BOLT (A)
Qty: 2
SCREW (F)
Qty: 4
HARDWARE BAG 2 CONTENTS :
RADIAL ARM ASSEMBLY
NYLON NUT (C)
FLAT WASHER (B)
FLAT WASHER (B)
BOLT (A)
SEAT WELDMENT SET
FRONT COVER
CENTER SUPPORT FRAME
BACK COVER
SCREW (F)
RADIAL ARM ASSEMBLY
STOPPER
STEP -D: INSTALLING THE STOPPER:
SXS_5.7_rev.1.1.indd 8-9
8/30/07 11:12:44 AM