1
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
&
MAINTENANCE
LIMITED
W
ARRANTY
15
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
Open
HARDWARE BAG 7
.
Remove
NYLON NUT
,
FLAT WASHER
,
THREADED SCREW
and
BALL
from end of
CABLE C
.
Route
CABLE C
through the pulley system in the
RADIAL ARM ASSEMBLY
as shown in
diagram.
NOTE:
After threading through one arm of
RADIAL ARM ASSEMBLY
thread
CABLE C
up
through
SINGLE FLOATING PULLEY BRACKET
before bringing to back through other arm.
After
CABLE C
routing is complete replace nylon nut, threaded screw and ball on end of
cable.
Hook
HANDLES
on to cable using the 2
HOOKS
.
A
B
C
D
E
ASSEMBLY
STEP
CABLE C
Qty: 1
HARDWARE BAG 7 CONTENTS :
BALL
NYLON NUT
FLAT WASHER
HANDLE
HANDLE
HOOK
CLEVIS
FLAT WASHER (B)
SCREW (E)
SINGLE FLOATING
PULLEY BRACKET
CABLE C
Open
HARDWARE BAG
.
Remove nylon nut, threaded screw and ball from end of
CABLE D
.
Route
CABLE D
through the pulley system in the
UPPER PULLEY BRACKET
ASSEMBLY
as
shown in diagram.
After
CABLE D
routing is complete replace nylon nut, threaded screw and ball on end of
cable.
A
B
C
D
ASSEMBLY
STEP
CABLE D
Qty: 1
HARDWARE BAG CONTENTS :
BALL
NYLON NUT
FLAT WASHER
HOOK
CLEVIS
FLAT WASHER (B)
CABLE (D)
LAT BAR
SCREW (E)
SXS_5.7_rev.1.1.indd 14-15
8/30/07 11:13:01 AM