manualshive.com logo in svg

Horizon Fitness PF-P330, Руководство пользователя

Поделиться
Скачать
Horizon Fitness PF-P330 Скачать руководство пользователя страница 57

5

5-7

5: Folding Quality Troubleshooting

Folding Quality Troubleshooting

Deflector mechanism malfunctions.

Check the followings:

1

The fixing screws on the deflector are fully

tightened.

2

The fulcrum screw on the deflector lever is

fully tightened.

3

The connecting screw on the deflector lever is

fully tightened.

4

The screw connecting the plunger of the

solenoid Y02/Y03 and the lever bracket is fully

tightened.

5

The fixing screws on the solenoid Y02/Y03 are

fully tightened.

- When pushing in the plunger of the Y02/Y03

manually, the deflector moves smoothly.

- When changing the fold patterns by pressing the

fold pattern selecting button, the Y02/Y03 moves

correctly.

5-6

Sheet Jams at the Deflector

Antistatic tape on the deflector comes
off.

- The antistatic tape is attached on the deflector as

shown above.

When the deflector is raised (when the solenoid

Y02 is ON), the edge of the sheet that comes

through the second and third fold roller touches the

antistatic tape and is delivered.

- Check the attachment of the antistatic tape by

inserting hand from the delivery conveyor side and

touching the rear (infeed) side of the deflector.

The deflector is deformed.

- If the deflector is deformed and does not align with

the fold roller at the center, the sheet path is

blocked there and may cause wrinkles.

Remove the deflector and flatten it out. [Distortion:

within 0.1 mm (0.004”) ]

- When removing  the jammed sheet on the deflector,

if it is pulled by force, that may deform the deflector.

Instruct the operator how to remove the jammed

sheet.

The Third 
Fold Roller

Deflector

Antistatic Tape

1

2

4

3

5

3

Deflector

Deflector Lever (front)

Lever Bracket

Y02/Y03

Fulcrum

2

Plunger

Deflector Holder

4

3

5

1

Correct

Incorrect

At Center

The Third Fold Roller

Deflector

5-6: Sheet Jams at the Deflector

Содержание PF-P330







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды