manualshive.com logo in svg

Horizon Fitness Perfect Binder BQ-260, Руководство пользователя

Поделиться
Скачать
Horizon Fitness Perfect Binder BQ-260 Скачать руководство пользователя страница 47

41

5. Operation Procedure

5-1

 Followings are process of pad binding

(with milling).

1) Stock is clamped with clamper and

transported to milling unit and milled off
spine.

2) Stock is transported to home position and

clamper is automatically opened on level
plate to rejog stock.

3) Stock is applied glue on melt tank unit.

4) Stock is stopped over nipping unit for

several seconds to dry glue.

5) Stock is transported to home position

through over lowered melt tank unit.

6) Stock is released from clamper.

  5-2

 Followings are process of pad binding

(without cover)

1) Stock is clamped with clamper and

transported to melt tank unit.

2) Stock is applied glue on melt tank unit.

3) Stock is stopped over nipping unit for

several seconds to dry glue.

4) Stock is transported to home position

through over lowered melt tank unit.

5) Stock is released from clamper.

5-2 Pad Binding

Содержание Perfect Binder BQ-260































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды