Horizon Fitness Perfect Binder BQ-260, Руководство пользователя

Страница: 45 / 94

39
5. Operation Procedure
5-1
Followings are process of binding (with
milling).
1) Stock is clamped with clamper and
transported to milling unit and milled off
spine.
2) Stock is transported to home position and
clamper is automatically opened on level
plate to rejog stock.
3) Stock is applied glue on melt tank unit.
4) Stock applied glue is transported to
nipping unit. Nipping unit raises, sticks
cover to stock spine and nips them
strongly.
5) Stock formed spine is transported to
home position through over lowered melt
tank unit. Cover for next binding is fed on
nipping unit at same time.
6) Stock is released from clamper and falls
into vertical stacker unit.
5-2
Followings are process of binding (with-
out milling).
1) Stock is clamped with clamper and
transported to melt tank unit.
2) Glue is applied on spine at melt tank
unit.
3) Stock applied glue is transported to
nipping unit. Nipping unit raises, sticks
cover to stock spine and nips them
strongly.
4) Stock formed spine is transported to
home position through over lowered melt
tank unit. Cover for next binding is fed on
nipping unit at same time.
5) Stock is released from clamper and falls
into vertical stacker unit.
5-1 With Cover Binding Operation