Horizon Fitness Endurance3, Руководство пользователя, Страница: 8 / 17

14 15
ASSEMBLY Step 5
all
MoDelS
enDUrance 4, enDUrance 5i ASSEMBLY Step 6
Endurance 4
Endurance 5i
BOLT (O)
SPRING WASHER (B)
FLAT WASHER (E)
FLAT WASHER (K)
BOLT (M)
NUT (J)
LOWER HANDLEBAR
SPRING WASHER (B)
TEFLON WASHERS (P)
LOWER LINK ARM
PEDAL ARM BRACKET
A
Open hardware bag 5 .
B
Slide lower link arm onto pedal arm
bracket .
C
Attach lower link arm to pedal arm
using 1
flat washer (k)
, 1
spring
washer (b) and 1 bolt (m) .
d Align opposite end of
lower link arm
with
bracket on bottom of lower handlebar .
E Place teflon washers (p) on both sides of
the lower link arm . While holding teflon
washers (p) slide lower link arm into
bottom end of
lower handlebar
.
F
Secure the joint with 1 flat washer (e) , 1
spring washer (b) ,1 bolt (o) and secure
with 1 nut (j) .
g
Repeat steps B–F on the opposite side of the
elliptical.
BOLT (M)
20 mm
Qty: 2
SPRING WASHER (B)
15 mm
Qty: 4
FLAT WASHER (K)
20 mm
Qty: 2
TEFLON
WASHER (P)
28.4 mm
Qty: 4
FLAT WASHER (E)
17 mm
Qty: 2
NUT (J)
Qty: 2
BOLT (O)
70 mm
Qty: 2
HarDWare BaG 5 CONTENTS :
enDUrance 5i SHoWn
* This step is for Endurance 4, Endurance 5i models only.
* Other models skip to next page.
A Open hardware bag 6 .
B Silde
top cap
and
top cap rear cover
over console mast and snap into place.
C Slide console mast boot around
console mast and insert into top cap .
d
Slide water bottle holder over
console mast and attach using 3 bolts
(r) .
Endurance 5i only:
E Slide rear cap over rear stabilizer and
attach using 2 screws (q) .
BOLT (R)
12 mm
Qty: 3
EX-78 only:
SCREW (Q)
15 mm
Qty: 2
HarDWare BaG 6 CONTENTS :
enDUrance 5i SHoWn
WATER
BOTTLE
HOLDER
CONSOLE MAST
CONSOLE MAST BOOT
TOP CAP
BOLT (R)
SCREWS (Q)
REAR CAP (EX-78 ONLY)
BOLTS (R)
TOP CAP
REAR
COVER
REAR STABILIZER