12
13
ASSEMBLY
Step 3
all
MoDelS
ASSEMBLY
Step 4
all
MoDelS
enDUrance 5i SHoWn
BOLT (M)
SPRING WASHER (B)
FLAT WASHER (K)
WAVY WASHER (L)
PEDAL ARM
CRANK
PEDAL ARM WHEEL
GUIDE RAIL
CONSOLE MAST
PRE-INSTALLED BOLTS
CONSOLE CABLE
MAIN FRAME
A
Open
hardware bag 4
.
B
Silde 1
flat washer (n)
, 1
wavy washer
(l)
and another
flat washer (n)
onto the
console mast
.
C
Slide
lower handlebar
onto
console
mast
and attach using 1
flat washer (n)
,
1
flat washer (k)
, 1
handlebar cap
, 1
spring washer (b)
and 1
bolt (m)
.
d
Repeat steps B–C on the opposite side of the
elliptical.
BOLT (M)
20 mm
Qty: 2
SPRING WASHER (B)
15 mm
Qty: 2
FLAT WASHER (K)
20 mm
Qty: 4
WAVY WASHER (L)
22.5 mm
Qty: 2
FLAT WASHER (N)
25 mm
Qty: 6
HarDWare BaG 4
CONTENTS :
enDUrance 5i SHoWn
BOLT (M)
SPRING
WASHER (B)
FLAT WASHERS (K)
FLAT WASHERS (N)
CONSOLE MAST
HANDLEBAR
CAP
LOWER HANDLEBAR
WAVY WASHER (L)
NOTE: Be
careful not
to pinch any
wires while
attaching the
console mast.
A
Open
hardware bag 3
.
B
Carefully pull the
console cable
through
the
console mast
using the twist tie located
inside the
console mast
.
C
gently slide the
console mast
onto the
main frame
and attach
console mast
to
main frame
using
pre-installed bolts
.
d
Slide
wavy washer (l)
over
crank
followed by
pedal arm
as shown. Rest
pedal arm wheel
on
guide rail
.
E
Attach the
pedal arm
to the
crank
using 1
flat washer (k)
, 1
spring washer (b)
and 1
bolt (m)
.
F
Repeat steps E–F on the opposite side of the
elliptical.
BOLT (M)
20 mm
Qty: 2
SPRING WASHER (B)
15 mm
Qty: 2
FLAT WASHER (K)
20 mm
Qty: 2
WAVY WASHER (L)
22.5 mm
Qty: 2
HarDWare BaG 3
CONTENTS :