Horizon Fitness ELITE 1.1T, Руководство по обслуживанию

Страница: 62 / 75

6.
With a 6mm Allen wrench, loosen the two motor bracket attachment bolts (M45,
M46).
7.
With a 6mm Allen wrench, remove the bolts (M06) and washers (M30, M25)
holding the motor to the motor bracket, and replace it with a new motor.
8.
Put the new motor in place on the frame, taking caution to properly align the motor
flywheel pulley and the front roller pulley. Tighten with a 13mm wrench.
9.
Place the drive belt on the drive motor; making sure that the motor pulley is
aligned with the roller pulley.
10.
Tighten the two motor attach bolts (M45, M46) with a 6mm Allen wrench.
11.
Verify the proper tension on the drive belt. Using a timing belt tension gauge, the
proper tension should be between 65 to 75 lbs. If a timing belt tension gauge is
not available, the drive belt should have approximately 3/8 of inch deflection. If
the drive belt tension is not set properly, loosen the motor attachment bolts and
adjust.
62