Horizon Fitness ELITE 1.1T, Руководство по обслуживанию

Страница: 33 / 75

Eng5 – Software Change (4.1T, 5.1T Models Only)
4.1T, 5.1.T
a) While in the Engineering Mode Menu, press the Speed “
∧
” or “
∨
“ button until Eng5 appears in
the display.
b) Press, “Select” to select.
c) Press “Select” to toggle between 4.1T and 5.1T software versions.
d) Press and hold “Start” for 3 – 5 seconds until the console beeps 3 times. The value has now been
properly saved.
Eng6 – Change from Miles to KM (2.1T, 4.1T, 5.1T Models Only)
a) While in the Engineering Mode Menu, press the Speed “
∧
” or “
∨
“ button until Eng6 appears in
the display.
b) Press, “Select” to select
c) Press “Select” to toggle between Miles and KM software versions (0 = Miles, 1 = KM)
d) Press and hold “Start” for 3 – 5 seconds until the console beeps 3 times. The value has now been
properly saved.
Note: To change from miles to KM on the 3.1T you must flip the switches on the back of the
upper board to the following configuration: Switch 1=UP, Switch 2=DOWN, Switch 3=UP.
33