Horizon Fitness ELITE 1.1T, Руководство по обслуживанию

Страница: 67 / 75

Console Cable Replacement – 2.1T, 3.1T, 4.1T, 5.1T Models
Tools required:
Philips screwdriver
Allen wrench (5mm)
Procedure: (Diagram on following page)
1. Turn off the power to the treadmill and unplug the power cord from the wall outlet.
2. With a Philip head screwdriver, remove the motor cover and disconnect the console
cable from the lower control board.
3. With a Philip head screwdriver, remove the back panel for the upper board and
unplug the console cable from the connectors.
4. Fold up the deck and remove the wire protective cover (N08) and remove the cable
ties attaching the cable to the incline frame.
5. Attach the new console control cable to the old one with a solid string at the bottom
of the cable.
6. Pull the old cable continuously until the new cable comes out of the top of the right
support.
7. Reconnect the console cable and install the protective wire cover. Attach cable ties
to the cable, securing it to the incline frame.
8. Install the motor cover and the back console panel.
67