5
CHAPTER 2:
Preventative Maintenance
2.1 PREVENTATIVE MAINTENANCE-CONTINUED
EVERY 6 MONTHS OR 150 MILES
It is necessary to lubricate your treadmill running deck every
six months or 150 miles (240 kilometers) to maintain optimal
performance. Once the treadmill reaches 150 miles (240
kilometers), the console will display the message
“LUBE”
or
“LUBE BELT”
. The treadmill will not operate while the
message is showing. Hold
‘STOP’
for 5 seconds to suspend
message for 5 miles.
Your treadmill came with a bottle of lubricant which can be
used for two applications.
●
Turn off the treadmill with the on/off switch, then unplug the
power cord at the wall outlet.
●
Loosen both the rear roller bolts. (for best results, place two
removable marks on both sides of the frame and note roller
position). Once the belt is loosened, take the bottle of
lubricant and apply it to the entire top surface of the
running deck. Tighten both rear roller bolts (matching up the marks for proper position) to original position. After you
have applied lubricant, plug in the power cord, insert the safety key, start the treadmill and walk on the belt for two
minutes to spread the lubricant.
●
Lubricate the air shocks with Teflon based spray.
●
Once lubrication is complete, reset the console by pressing and holding
‘STOP’
and
‘SPEED +’
buttons for 5 seconds.
