13
CHAPTER 4: Engineering Mode
4.1 ENGINEERING MODE
1) To enter Engineering Mode, press & hold the INCLINE
UP
“
▲
”
and SPEED DOWN
“
－
－
－
－
”
keys at the same time for
3-5 seconds until Engineering Menu appears on the
display.
2) Use the INCLINE and SPEED UP and DOWN keys to
select a parameter.
3) Press ENTER to enter a parameter setting.
4) Use the INCLINE and SPEED UP and DOWN keys to
change the parameter.
5) Press the START key to save the change to the parameter.
6) Press and hold the STOP key to exit Engineering Mode and return to normal operation.
