manualshive.com logo in svg

horiba LAQUA COND DS-72, Инструкция по эксплуатации

Поделиться
Скачать
horiba LAQUA COND DS-72 Скачать руководство пользователя страница 78

Chapter 7  Application Mode 

66

HORIBA

7.1.8 Measured by PPRC (CP) (Stage 1)

1.

Select the CP in the COND pharmacopeia mode 
screen.

2.

Tap 

 on the right of the Stage 1 item.

3.

Before measurement, set the temperature 
conversion to OFF in accordance with the 
regulation prescribed by PPRC, and the setting 
of the unit is automatically changed to S/cm. 
The changed settings are applied.

4.

Tap 

 to proceed to next procedure.

5.

Immerse the COND electrode in sample solution 
and tap 

 to start the measurement.

When measurement is completed, the conduc-
tivity of the sample solution and the measure-
ment condition are displayed as a measurement 
result.
Tap 

 to return to the COND pharma-

copeia mode screen.

Evaluation is conducted based on the "7.1.10 
Temperature and Conductivity Requirements" 
(P.68). 
If the measured temperature is between the 
indicated temperatures, the value at 
temperature lower than the measured 
temperature is applied as the permissible 
conductivity.

Содержание LAQUA COND DS-72






























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды