manualshive.com logo in svg

horiba LAQUA COND DS-72, Инструкция по эксплуатации

Поделиться
Скачать
horiba LAQUA COND DS-72 Скачать руководство пользователя страница 6

SAFETY OPERATION

III

■

Hazard Classification and Warning Symbols

Warning messages are described in the following  manner.  Read  the         
messages and follow the instructions carefully.

●

Hazard classification

●

Warning symbols

SAFETY OPERATION

This indicates an imminently hazardous situation which, 
if not avoided, will result in death or serious injury. This 
signal word is to be limited to the most extreme 
situations.

This indicates a potentially hazardous situation which, if 
not avoided, could result in death or serious injury.

This indicates a potentially hazardous situation which, if 
not avoided, may result in minor or moderate injury. It 
may also be used to alert against unsafe practices.

Description of what should be done, or what should be followed

Description of what should never be done, or what is prohibited

Содержание LAQUA COND DS-72






























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды