manualshive.com logo in svg

horiba LAQUA COND DS-72, Инструкция по эксплуатации

Поделиться
Скачать
horiba LAQUA COND DS-72 Скачать руководство пользователя страница 4

I

■

EU Regulations

●

Conformable standards

This equipment conforms to the following standards:

●

Installation environment

This product is designed for the following environment.
- Overvoltage category II
- Pollution degree 2

●

Information on disposal of electrical and electronic equipment and

     disposal of batteries and accumulators

EMC:

EN61326-1
Class B, Basic electromagnetic environment

Safety:

EN61010-1

RoHS:

EN50581
9. Monitoring and control instruments

Warning:

This product is not intended for use in industrial environments. In an 
industrial environment, electromagnetic environmental effects may 
cause the incorrect performance of the product in which case the user 
may be required to take adequate measures.

The crossed out wheeled bin symbol with underbar  shown  on  the          
product or accompanying documents indicates  the  product  requires       
appropriate treatment, collection and recycle for waste electrical and        
electronic equipment (WEEE) under the Directive  2012/19/EU,  and/or       
waste batteries and accumulators under the Directive 2006/66/EC in        
the European Union. 
The symbol might be put with one of the chemical symbols below. In            
this case, it satisfies the requirements of the Directive 2006/66/EC  for          
the object chemical. 
This product should not be disposed of as unsorted household waste.
Your correct disposal of WEEE, waste batteries and accumulators  will         
contribute to reducing wasteful consumption of natural resources,  and        
protecting human health and the environment from  potential  negative        
effects caused by hazardous substance in products.
Contact your supplier for information on applicable disposal methods.

Содержание LAQUA COND DS-72






























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды