horiba B-711, Инструкция по эксплуатации

Страница: 28 / 34

20
7.3 Display digit setting (only for B-712/B-713)
Used to select the display digit (One or two decimal places) for measured
value.
The initial setting is one decimal place.
4.
Press the CAL switch for 0.5 seconds to change the setting.
5.
Press the MEAS switch to apply the setting.
The measurement mode is returned.
1.
Press and hold the MEAS switch for over 3
seconds in the measurement mode to
enter the special setting mode.
All items appear on the LCD, and then the dis-
play changes as shown right.
2.
Press the CAL switch until appears.
3.
Press the MEAS switch for 0.5 seconds.
The current setting is displayed.
One decimal place
Press the CAL switch
Two decimal places
for 0.5 seconds.