Language :
en
Revision :
005
Page :
9
Low-pressure water
refilling system
FNC
© 2012, Hoppecke Batterie Systeme GmbH, all rights reserved.
4.2
Filling Operation
1. Switch on the waterfilling cart; the
software version is displayed for 10
seconds.
2. Start the filling operation with the help
of the Start button. The pilot lamp lights
up in yellow.
Figure 6: Switching on
Figure 7: Display of the software version
Note:
The filling operation runs automatically. As soon as all cells have been filled, the
waterfilling cart extracts excess water from the connected hose pipes. The filling
operation takes a few minutes depending on the number of cells and the water level in
the cells.
Note:
Avoid overfilling.
Carry out the refilling activity once only per maintenance interval.
Repeated triggering of the refilling activity at the same maintenance interval can overfill
the battery system. This can lead to leakage of electrolyte and a higher pollution of the
battery system during operation.
In addition, overfilling will change the electrolyte density and the performance of the
battery can be negatively affected.
If cells are filled above maximum level, contact HOPPECKE service.
