Icon
Menus and
Sub-menus
Function Descriptions
Although “Auto Adjustment” automatically finds the optimum values of
FINE and COARSE parameters as well as images position, it may be
necessary for you to adjust those parameters manually. It is recom-
mended for you to use “Auto Adjustment” first. If the adjustment results
are not satisfactory, then use COARSE and FINE adjustment features
to get the best adjustment results. Bear in mind that COARSE and
FINE adjustments may change the width and affect image position as
well. If the image is clear while out of center by a couple pixels, use
image position to center the image.
H-Position
V-Position
Note: these functions should only be used if “Auto Adjustment”
does not yield satisfactory results.
!
Changes the location of the image.
!
If the image is off center, use this function to center the image.
!
Works only with Analog source.
!
H-Position
“-“ : Move to the LEFT
“+” : Move to the RIGHT
!
V-Position
“-“ : Move to the BOTTOM
“+” : Move to the TOP
Color Control
Color can be changed from bluish white to reddish white. The individual
color components are also user customizable.
Mode 1
Reddish white
Mode 2
Plain white
Mode 3
Bluish white
User Mode
User customizable
Reset
Replace color parameters with factory default values.
Image Size
Note: this function should only be used if “Auto Adjustment”
does not yield satisfactory results.
Aspect ratio is the proportion of vertical versus horizontal resolution,
and it varies depending on the video resolution. For example 640x480,
800x600 and 1024x768 have the aspect ratio of 4:3, and 1280x1024
has the aspect ratio of 5:4. To view original image without geometrical
distortion, aspect ratio must be preserved.
!
Expand
1
Performs full screen image expansion regardless of the aspect ratio of
the input video resolution
!
Expand
2
Performs image expansion while keeping the aspect ratio of the original
video resolution. Usually there will be some unfilled space to the hori-
zon direction.
!
Normal
Performs no image expansion. In this mode, input video is displayed at
the center of the monitor as is.
RECALL
Discards current setting and replaces corresponding parameters with
the factory default values.
8
