background image

 

Safety and Regulatory Information 

 
 

Warning 

 
To prevent fire or shock hazard, do not expose the unit to rain or moisture. Dan-
gerously high voltages are present inside the unit. Do not disassemble the unit. 
Refer servicing to qualified personnel only. 
 
This equipment is not intended for use in critical applications where its failure to 
operate would create immediate life threatening circumstances.  Applications in-
cluding, but not limited to, nuclear reactor control, aerospace navigation systems 
and life support systems are not appropriate for this product. 
 
This product is intended to be mounted in a suitable cabinet or other enclosure.  
The NEMA 4, 4x or 12 ratings are applicable only when properly installed in a like 
rated enclosure. 
 
This product is a UL Recognized Component and must be used with a listed com-
puter.

 

 

FCC Notice 

 

This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protec-
tion against harmful interference when the equipment is operated in a commercial environment.  
This equipment generates uses and can radiate radio frequency energy and, if not installed and 
used in accordance with the instruction manual, may cause harmful interference to radio com-
munications.  Operation of this equipment in a residential area is likely to cause harmful inter-
ference in which case the user will be required to correct the interference at his own expense.  
Any changes or modifications not expressly approved by the grantee of this device could void 
the user’s authority to operate the device.  

  

Содержание HIS-ML21-*** D series



















Отзывы: