Icon
Menus and
Sub-menus
Function Descriptions
!
PC Source 2: PC Video Signal Digital (DVI)
!
Video Source 1: Normal Composite Video Signal (RCA)
!
Video Source 2: Super Video Signal (S-Video)
!
The method for changing source is the same as PIP.
Information
!
Shows information about the current video signal, including the fol-
lowing
-
Video signal type: Analog/Digital
-
Sync: types and frequencies with polarities
-
Resolution
Video Control
!
The color characteristic of Composite Video is often different from
that of the PC signal.
!
Use Video Control to adjust color characteristics of Composite
Video independently of the PC video.
!
Brightness: increases or decreases the light intensity of composite
video
!
Contrast: increases or decreases the ratio of light intensity be-
tween the brightest white and the darkest dark
!
Saturation: increases or decreases the color purity
!
Hue: changes the color tone
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy by
switching your monitor into a low-power mode when it has not been used for a certain period of time. The
available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. Power Saver operates with a VESA
DPMS compliant video card installed in your computer. You use a software utility installed on your com-
puter to set up this feature. See Table 2 below for details.
Table 2. Power-saving modes
Power-Saving Function Mode (EPA/NUTEK)
State
Normal
Operation
Standby
Mode
Sleep Mode
Position 1
Deep Sleep
Mode
Position 2
Horizontal
Sync
Vertical Sync
Video
Active
Active
Active
Inactive
Active
Blanked
Active
Inactive
Blanked
Inactive
Inactive
Blanked
Power Indica-
tor
Green Amber
Amber
Blinking
(0.5 sec interval)
Amber Blinking
(1 sec. interval)
Power
Consumption
90W (Max.) Less than
5W
Less than 5W
Less than 5W
NOTE: This monitor automatically returns to normal operation when horizontal and vertical sync return.
This occurs when you move the computer’s mouse or press a key on the keyboard.
10
