12
GB
INSTRUCTIONS FOR ASSEMBLY AND USE
Unfolding the stroller
Release the storage latch
Grip the handle and lift it upwards
To lock the frame,lift handle as high as possible then,jerk upwards while placing one foot on
theframe lock
Attaching front wheels
• Push the front wheel axle into the hole on the plastic stand at the end of the front frame sup-
portleg until it fastens with a clik.
• Repet for the other wheel assembly.
• Check that the wheels are firmly attached by attempting to pull the wheels assembly off the
plasticstand.
Attaching rear wheels
• Push the hole in the rear wheel assembly onto the end of the rear tube until it fastens with a
click.
• Repeat for the other rear wheel assebly.
• Check that the wheels are firmly attached by attempting to pull the wheels assembly off the
rear tube.
Attention: Please make sure to attach left and right wheels onto the rear tubes.
Attaching bumper bar
• Insert the two bumper bar plugs into the holes at side armrest until it fasten with a click.
• Check that the bumper bar is firmly attached by attempting to pull it off the side armrest.
Attaching canopy
• Insert the canopy pin into the hole on the plastic situated on the interior side of the tube.
• Repeat the same action for the other side.
Front swivel wheels
• The front swivel wheels can be locked in the forward direction or unlocked to rotate freely.
• Move the hinged button up or down to lock or unlcok the wheel.
Leg rest adjustment
• Press up the two plastic parts at the end of leg rest downward with two hands and move the
legrest to the desired positioned.Note:Make sure both ends are at the same angle.
Backrest adjustment
• The backrest position can be adjusted among 3 positions.
• Press the two triggers towards middle to release the lock, and move the backrest to the
disiredposition.
• When postioning the backrest from the layback positon to the sitting position,simply move
thebackrest upwards,there is no need to use the triggers.
1
2
3
4
5
7
8
9
10
11
6
IM 1619,02 HOP ins.indd 12
06/05/13 18:41
