5
1-14
1-10
1-11
driver.
Only two nuts are needed on this model.
converter firmly to snap in place. Press solution tube (G) into clip next to converter as shown.
Wrap hose around hook on upper
handle (J). Press hose into clips on upper
hose holder (K).
How to reattach tool cover
The tool cover is designed with a break-away feature which allows it to snap free if it is
pushed open too far.
To reattach, align hinges of cover with slots
on sides of tool storage area.
Push cover down to secure in place.
1. Hand
grip
2. Solution
trigger:
press to
release clean solution.
3. Cord clip:
place cord in clip
to keep it out of the way
G
H
H
I
J
K
G
K
F
E
1-12
1-13
Wrap hose around lower tool holder and
continue until nozzle connector is near
upper hose holder. Clip hose in place.
Continued
➔
when using cleaner
4. Hose
5. Hose holder:
wrap hose
around holder and hooks
for
storage.
6. Hose hooks
7. Cord
hooks:
wrap cord
around hooks for storage.
The
top hook can be rotated
right
or left for quick and
easy
1-15
1-16
1-17
Powered hand tool
The powered hand tool is shipped in a plas-
tic bag for protection. Remove the bag
before using the tool by first opening tool
door.
Upfront tool storage
To remove tool (A), pull it down and out-
ward.
To reposition the tool, reverse this proce-
dure.
