3
3. To reattach the dust cup cover, align the indicators that are printed on the
rear of the dust cup and cover. Turn the cover clockwise and make sure the
solid arrows are aligned before reinserting the dust cup into the vacuum.[
20]
4. To replace the dust cup in to the unit, gently push the dust cup assembly down and
the dust cup will click into place.
[21]
Cleaning of steam outlet on the base cover
1. Remove base cover from cleaner and also remove textile pad.
[22]
2. Clean any debris from steam outlet on base cover.
[23]
TROUBlESHOOTING
Should you have a problem with the product, complete this simple user checklist before
calling your local Hoover service.
The Cleaner will not switch on.
•
Check the unit is plugged in.
•
Check the power cord
The Cleaner is not producing steam.
•
The base cover was not attached.
•
There may be no water in the clean water tank.
•
The tank may not be fitted correctly.
•
The cleaner was not long enough in the tilt position.
•
The steam adjust button was not activated to select the steam rate.
The textile pad won’t pick up dirt.
•
The cleaning pad may already be saturated with dirt and needs to be washed.
Refer to the maintenance section.
The Cleaner will not vacuum
• The base cover was not detached
• The cleaner was not long enough in the tilt position.
ClEANING FAQS
when is steamjet ready?
In approximately 30 seconds.
Can I use steamjet on all floor surfaces?
On all hard floors like marble, ceramic, stone,
linoleum, sealed hardwood floors and parquet.
does steamjet emit steam automatically?
Yes, Recline the cleaner by placing a foot
on the floor head then the steam will emit automatically.
Can Iuse it vertically?
No, steamjet can be used only on horizontal floor surfaces.
Can Iput detergents or other chemicals inside the tank?
No, you would damage the
product.
what if in the city where I live the water is very hard?
You can use filtered water.
How long will one tank of water last before needing to be refilled? Approximately 20
minutes if you use the steam continuously .
Is the mop washable?
Yes, it can be washed by hand or in the washing machine with a
mild detergent at max temperature 40°C. Do not use bleach or fabric softener.
How often should I replace the mop?
It depends on different factors above all how hard
the floor is. The best way to understand when to change the mop is when the mop is still
dirty after having washed it or if you notice that it doesn’t perform like before.
ImPORTANT INFORmATION
Hoover spares and Consumables
Always replace parts with genuine Hoover spares. These are available from your local
Hoover dealer or direct from Hoover. When ordering parts always quote your model
number.
Consumables
Pre-motor Filters’ kit: U69 35601401
Textile Pad: AC28 35601402
Hoover Service
Should you require service at any time, please contact your local Hoover Service Office.
Quality
Hoover’s factories have been independently assessed for quality. Our products are made
using a quality system which meets the requirements of ISO 9001.
your Guarantee
The guarantee conditions for this appliance are as defined by our representative in the
country in which it is sold. Details regarding these conditions can be obtained from the
dealer from whom the appliance was purchased. The bill of sale or receipt must be
produced when making any claim under the terms of this guarantee.
Subject to change without notice.
GB
