draft
4
GB
Please Read Carefully Before Use
Contents
Important Safety Reminders....................................................................................................................4
It is important that you do not..................................................................................................................4
Assembling Your Cleaner ........................................................................................................................4
Using your cleaner ..................................................................................................................................4
Cleaner Maintenance ..............................................................................................................................5
Accessories ............................................................................................................................................5
User Checklist..........................................................................................................................................5
Important Information ..............................................................................................................................6
Your guarantee ........................................................................................................................................6
This cleaner should only be used for domestic cleaning, as described in this User Guide. Please
ensure that this guide is fully understood before operating the appliance.
Warning:
Electricity can be extremely dangerous. This appliance is double insulated, and must not be
earthed. This plug is fitted with a 13 amp. fuse. (UK Only).
Important:
The wires in the mains power lead are coloured in accordance with the following code:
Blue - Neutral
Brown - Live
Static Electricity:
Some carpets can cause a small build up of static electricity. Any static electricity
discharge is not hazardous to health.
Remember:
After use, switch the cleaner off, and remove the plug from the electricity supply. Always
switch off and remove the plug before cleaning the appliance or attempting any maintenance.
•
Position the cleaner above you when cleaning the stairs
•
Use the cleaner out of doors, on wet surfaces, or for wet pickup
•
Pick up matches, hot ash, cigarette ends, hard or sharp objects or anything that may damage the
cleaner
•
Spray with, or pick up flammable liquids, cleaning fluids, aerosols, or their vapours, as this may
cause risk of fire/explosion
•
Run over the supply cord whilst using the cleaner, or remove the plug by pulling on the cord
•
Stand on, or wrap the power cord around arms or legs when using the cleaner
•
Continue to use your cleaner if it appears to be faulty. If the supply cord is damaged, stop using
the cleaner IMMEDIATELY: to avoid a safety hazard, an authorised Hoover Service engineer must
replace the supply cord
•
Connect hose to cleaner main body, as shown in P1
•
Connect tube upper end to handle, as shown on P2
•
Connect floor nozzle to lower tube end, as shown in P3
1.
Power Supply - Extract cord fully and plug it into a power supply (P4).
2.
Navigator System - For outstanding ease of use, grip the handle as shown (P5). Pull the
TeleZoom trigger to adjust the length of the metal tubes and find the most comfortable cleaning
position (P5).
3.
Front&Side Clean nozzle - Press the pedal on the nozzle (P6) to select the ideal cleaning mode
for the floor type.
Hard Floor: The brushes are lowered to protect the floor
Carpet: With lifted brushes for the deepest clean
The Front and Side Clean nozzle rotates each way (P7) to reach into the narrowest spaces. Tip
one end of the nozzle to bring it back to normal working position.
4.
Turn the cleaner on - Depending on model this is achieved by:
•
Pressing the On/Off button on the Navigator System handle (P8)
•
Pushing the power control slider on the cleaner body (P9)
•
Pushing the On/Off button on the cleaner body (P10)
5.
Adjust the power setting - Depending on model this is achieved by:
•
Selecting the cleaning programme in the Navigator handle (P12)
•
Sliding the power control to suit the surface to be cleaned (P11)
6.
Switch off at the end of use by reversing the action to switch on. Unplug then gently pull the power
cord out of the cleaner (P4) and the cord will then begin to automatically retract back into the
cleaner.
7.
Parking and Storage - The tube can be parked for temporary storage while in use (P13), or in the
storage position when not in use (P14).
HOOVER FREEMOTION USER GUIDE
IMPORTANT SAFETY REMINDERS:
IT IS IMPORTANT THAT YOU DO NOT:
ASSEMBLING YOUR CLEANER:
USING YOUR CLEANER:
