Hoover AIS 136, Инструкция пользователя

Страница: 23 / 53

Description of controls
All of the buttons and dials on the washing machine control panel are listed below.
When you have selected the desired programme and any option buttons, the information you
have selected will appear on the screen in the Inter@ct display panel.
When programmes and option buttons are compatible a bleeping sound will be heard and the
light above the option button selected remain illuminated. If you select an option button that is
not compatible with the programme you require (e.g. if you choose a cottons wash
programme and try to select “Fast Iron” button) a buzzing sound will be heard and the button
light will not illuminate. To select an option button press it once; to deselect an option button,
press it again.
Carefully read the relevant descriptions detailed below:
Programme Selector Dial
Note: Do not press the start/pause button before
selecting the programme. If this does happen, cancel
the programme (that you have set accidentally) by
pressing the start/pause button for five seconds (See
programme cancelled description).
When you turn the programme selector dial and after the welcome message has
disappeared, you will see a display showing the following details:
Reading from left to right:
1. The programme number
2. The programme name
3. The wash temperature
4. The degree of soiling (how dirty the wash load is)
5. The spin speed
Example
1 WHITE COTTON
90° HEAVY 1300 RPM
45
Enable Final Beeping (default setting - YES)
Here you have the option to have a beeping alarm to let you know the wash cycle has finished.
By pressing the “Extra Rinse” button you can scroll through the “yes” and “no” options.
To enter your selection press the “Express Wash” button and the screen will then move to the
next stage and ask you to “Set New Time”
Set New Time
This function needs to be set for two reasons: firstly to display the current time of day on the
screen and secondly for the programme end/delay start settings to work correctly.
You will notice in the display window that the hours on the clock will be flashing.
Set the hours by continually pressing the “Extra Rinse” button and then press the “Express
Wash” button to enter the hour.
Next the minutes on the clock will begin to flash, again press the “Extra rinse” button until the
required minutes are displayed and press “Express Wash” to input the selection.
When you have Set the New Time, the display will then ask if you wish to “Enable Memory”.
Enable Memory (default setting - NO)
This is a useful feature if you frequently wash laundry using the same programme.
Selecting “Enable Memory” will tell the machine to remember the last programme/functions
used and set them in the memory. This function works only on cottons, delicates, synthetics
and woolens programme. The memory does not retain settings within the special programme
group.
Select “Yes” or “No” to this option by using the “Extra Rinse” and “Express Wash” button to input
the selection.
The display will then shown a message that asks if you require demo mode to be set.
Demo mode (default setting - NO)
Please set this option to “No” if not done so already - as this is for SERVICE use only.
If the demo mode option is not set on “NO” when exiting the inter@ct menu the wash
programme WILL NOT commence. Demo Mode must be set at “NO” for the wash cycle to
commence. On entering “No” via the “Express Wash” button you will then be asked if you
wish to “Exit Menu”.
Exit Menu
If you are happy with the settings you have selected, you can now exit the menu by selecting
“Yes” via the “Extra Rinse” and “Express Wash” buttons.
However, if you are not happy with any of the settings selected you must select “No” to the
exit menu command and you can then commence the programming from the beginning. By
pressing the “Express Wash” button you are able to enter and bypass each option individually
until you reach the option you would like to re-set.
When you are completely satisfied with your menu selection, you may exit the menu and
testing of the installation may now commence.
If, after the initial installation you may want to change of any of the menu at a later date, again
run through the menu options from the beginning and change the options you want to reset.
This may be useful to change the “Set New Time” when the clocks go forward or back.
Once set, the menu options will remain in the memory of the machine even if the machine is
unplugged or if a power cut occurs.
44