11
PROGRAMMING YOUR ST9120C
Exiting Programming Mode:
To exit programming mode, move the slider to the
RUN
position. This can be done at
any time during the programming process, and any changes made and confirmed
with the button will have been saved.
Note:
If the unit is left in Programming mode for more than 10 minutes without the slider
being moved or any buttons pressed, the message ‘MOVE SLIDER’ will be displayed.
Press a button to finish programming, or move the slider to the
RUN
position.
Disabling / Enabling Time Periods
To disable any of the time periods
ON 1
to
OFF 1
,
ON 2
to
OFF 2
, or
ON 3
to
OFF 3
,
simply set the
ON
time and its paired
OFF
time to the same time, and the programme
will just ignore them.
To re-enable the time period, simply set the two
ON
and
OFF
times to be different.
Содержание Y9120H Sundial RF2 Pack 1
Страница 30: ...29 ...
