Honeywell WEB-HMI Series, Руководство пользователя

Страница: 10 / 24

WEBs HMI Touchscreen Monitor - User Guide 6
Disabling the DHCP switch will allow you to enter the IP address manually.
After you press save , the manually entered IP address will be used for the device.
Note: The device has an internal firewall that blocks all incoming network traffic, including
Internet Control Message Protocol (ICMP) ping requests. Therefore, you cannot ping
the device to test the network connectivity.
Finish Quick start
The device is now configured to load the homepage you entered.
Therefore, you can close the setup menu to access the homepage by clicking EXIT
in the “System Settings” view. Depending on the Web Browser configuration “On
Startup”, the application launches or you need to press Load Homepage on the
Settings Page.