Honeywell UDC 2300, Руководство по эксплуатации продукта

Страница: 33 / 185

Configuration
12/00 UDC2300 Controller Product Manual 23
4 Configuration
4.1 Overview
Introduction
Configuration is a dedicated operation where you use straightforward keystroke
sequences to select and establish (configure) pertinent control data best suited for your
application.
To assist you in the configuration process, there are prompts that appear in the upper and
lower displays. These prompts let you know what group of configuration data (Set Up
prompts) you are working with and also, the specific parameters (Function prompts)
associated with each group.
Figure 3-1 shows you an overview of the prompt hierarchy as they appear in the
controller.
As you will see, the configuration data is divided into 11 main Set Up groups plus
prompts for calibration and prompts that show the status of the continuous background
tests that are being performed.
What’s in this section?
The following topics are covered in this section.
TOPIC See Page
4.1 Overview 23
4.2 Configuration Prompt Hierarchy 24
4.3 Configuration Procedure 25
4.4 Timer Set Up Group 26
4.5 Tuning Set Up Group 27
4.6 SP Ramp Set Up Group 29
4.7 Accutune Set Up Group 31
4.8 Algorithm Set Up Group 32
4.9 Input 1 Set Up Group 33
4.10 Input 2 Set Up Group 35
4.11 Control Set Up Group 36
4.12 Options Set Up Group 38
4.13 Communications Set Up Group 39
4.14 Alarms Set Up Group 41
4.15 Configuration Record Sheet 43