41
RAIN WINDOW
The
Weather Station
records a current the total amount of the rainfall for the last hour,
24 hours, past day, past week and the past month. The rainfall can be displayed in
inches
or
mm
.
The daily rainfall can be programmed to alert you if the rainfall exceeds a
pre-programmed limit.
ACCESSING RAIN WINDOW
Press
UP
or
DOWN
until the
RAIN
icon on the display starts flashing.
VIEWING RAIN STATISTICS
In the
Rain Window
press either
SET
or
MEM
button to recall:
•
Current rainfall
•
Rain for the last hour
•
Rain for the last 24 hours,
•
Yesterday rain
•
Last week
•
Last month.
Tip:
For the rain rate estimate the
Last Hour
rainfall value is understood as “inch/hr” or
“mm/hr”.
PROGRAMMING RAINFALL AMOUNT UNITS
In the
Rain Window
, press and hold
SET
button to program the rainfall units in mm or
inches.
RESETTING RAIN STATISTICS MEMORY
In the
Rain Window
, press and hold
MEM
to reset all rainfall statistics.
ACTIVATING OR DEACTIVATING RAIN ALARM
•
In the
Rain Window
press
ALARM/CHART
button to display either the current
rainfall or the daily rainfall alarm (with “
ALARM HI
” displayed)
•
If the rain alarm is disabled, the abbreviation “
OFF
” will be displayed; otherwise
the rainfall alarm amount will be shown
•
When the rainfall alarm amount is displayed, press
UP
to activate or
DOWN
to
deactivate
PROGRAMMING DAILY RAINFALL ALARM
•
In the
Rain Window
, press
ALARM/CHART
to display the rainfall alarm
•
Press and hold
ALARM/CHART
until the “
ALARM HI
” will flash
•
Set the desired amount for the rainfall alarm using
UP
or
DOWN
buttons. Press
42
and hold either button for fast digits advance.
•
Press
ALARM/CHART
to confirm selection and the unit will return to the
rainfall alert display.
WIND WINDOW
The front portion of the
Wind Window
shows wind direction in animated compass display.
The wind direction can be displayed as compass point (i.e. NW) or in bearing starting
from the North (i.e. 22.5º).
The upper left section of the
Wind Window
can be programmed to display either a
temperature at the place of anemometer or the temperature adjusted to the wind chill
factor.
The lower left section of the
Wind Window
indicates the average wind speed for the past
10 minutes, as well as gust, high wind speed and gust alarm information. It can also
show records of the maximum wind speed and wind gust collected during the day.
The wind speed and gust can be programmed to alert you if the wind speed or gust
exceeds a pre-set limit. The wind speed can be displayed in km/h, mph, m/s or knots.
ACCESSING WIND MODE
Press
UP
or
DOWN
until the
WIND
icon on the
Weather Station
display starts flashing.
OPERATING WIND WINDOW
In the
Wind Window
press the
SET
button to recall:
•
Wind chill temperature with wind direction in bearings
•
Wind chill temperature with a wind direction in compass points
•
Temperature at anemometer and wind direction in compass points
•
Temperature at anemometer and wind direction in bearings
PROGRAMMING WIND SPEED UNITS
In the
Wind Window,
press and hold
SET
to set the wind speed units in km/h, mph, m/s
or knots.
VIEWING WIND STATISTICS
In the
Wind Window
, press the
MEM
button to recall:
•
Current wind speed
•
Daily maximum wind speed with “
DAILY MAX
” displayed
•
Wind gust speed with a “
GUST”
displayed
•
Daily maximum gust speed with a “
GUST DAILY MAX”
displayed
RESETTING WIND STATISTICS MEMORY
In the
Wind Window
, press and hold
MEM
to reset all wind statistics memory.
