39
Indicator
displayed
Temperature
Range
Humidity
Range
Shows current condition
COMFORT
20°C to 25°C
(68°F to 77°F)
40%RH-
70%RH
Ideal for both relative
humidity and temperature
WET
-5°C to 50°C
(23°F to122°F)
OVER
70%RH
Contains excess moisture
DRY
5°C to 50°C
(23°F to122°F)
BELOW
40%RH
Contains inadequate
moisture
ACCESSING TEMPERATURE AND HUMIDITY WINDOW
Press
UP
or
DOWN
until the
IN
icon
on the upper right will flash.
VIEWING REMOTE (CHANNEL) TEMPERATURE AND HUMIDITY
Static Display:
In
Temperature and Humidity Window
, press the
CHANNEL
button to recall a different
channel.
Channel Auto-Scan Display:
To enable automatic scan of the different channels, press and hold
CHANNEL
, until the
3
icon is displayed. Each valid channel will be alternately displayed with a 5 seconds
delay.
NOTE
: The channel Auto-scan feature can be active only if there
are more than
one
remote sensors operating and are set to different channels.
RECALLING TEMPERATURE AND DEW POINT INFORMATION
In
Temperature and Humidity Window
press
SET
button recalling either:
•
Temperature and relative humidity
•
Dew point and relative humidity
PROGRAMMING TEMPERATURE IN CELSIUS OR FAHRENGEIT
In
Temperature and Humidity Window
, press and hold
SET
to toggle the temperature
in Celsius (
ºC
) or Fahrenheit (
ºF
).
ACTIVATING OR DEACTIVATING ALARMS
In
Temperature and Humidity Window
, press the
ALARM/CHART
to recall a current
40
temperature for the corresponding channel, the upper temperature alert with
▲
icon (if
disabled, displays
OFF
), or lower temperature alert with
▼
icon (if disabled, displays
OFF
).
Once the above alerts are displayed, press the
UP
or
DOWN
to enable or disable the
corresponding alert.
PROGRAMMING ALARMS
•
In the
Temperature and Humidity Window
, press
ALARM/CHART
selecting
the desired
alarm.
•
Press and hold
ALARM/CHART
button until the remote temperature and
▲
or
▼
icon starts flashing.
•
Adjust the temperature digits for the Temperature Alarm using the
UP
or
DOWN
. Press and hold either button for fast digits advance
•
Press the
ALARM/CHART
to confirm selection and return to the temperature
alarm selection screen
VIEWING REMOTE TEMPERATUR AND HUMIDITY MAX/MIN READINNGS
In the
Temperature and Humidity Window
press the
MEM
button recalling:
•
Current temperature and humidity
•
Minimum temperature and humidity
•
Maximum temperature and humidity at the remote location.
RESETTING REMOTE TEMPERATURE AND HUMIDITY MEMORY
In the
Temperature and Humidity Window
, press and hold
MEM
button to clear
memory for all channels.
REMOTE SENSOR STATUS
The wave icon above the current channel number shows the connection status of the
corresponding remote sensor:
Icon Status
Searching for the signals from the remote sensor
Corresponding remote sensor signal received successfully
No signals received for over 15 minutes
ALL REMOTE SENSORS SIGNAL ACTIVATION
The main unit can be manually activated to search for the signals from remote sensors
by pressing and holding
DOWN
button.
