Honeywell Thor CV41, Руководство пользователя, Страница: 89 / 118

CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide 81
Wireless LAN
Bluetooth
Default Configuration
The following tables list the default values of the configuration settings supported on
the computer. If you restore the computer to factory default settings, the computer uses
these values.
The settings are grouped by function and reflect the organization of Intermec Settings.
Not all of the configuration settings are listed in this appendix. For detailed information
on most of the settings, see the
Intermec Settings Command Reference Manual .
Data Collection Settings
Use data collection settings to configure the Bluetooth or tethered scanner and to con-
figure the bar codes that you want the imager to be able to read.
Wireless frequency
(varies by regulatory
domain) 2.4 to 2.4895 GHz IEEE 802.11b/802.11g DSSS OFDM
5.15 to 5.82 GHz IEEE 802.11a DSSS OFDM
RF data rates 802.11a (OFDM) 6, 9, 12, 18, 24, 26, 48, 54 Mbps
802.11b (DSSS) 1, 2, 5.5, 11 Mbps
802.11g (OFDM) 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (OFDM 20 MHz chs) 13, 26, 39, 52, 78, 104, 117, 130
Mbps
802.11n (OFDM 40 MHz chs) 27, 54, 81, 108, 162, 216, 243, 270
Mbps
RF power level 50 mW maximum
Channels FCC: 1 to 11, 36, 40, 44, 48, 149, 153, 157, 161
ETSI: 1 to 13, 36, 40, 44, 48
Security WPA, WPA2, 802.1x (EAP-TLS, TTLS, LEAP, PEAP, EAP-FAST), WEP
Cisco compatibility CCX v4 certified
Enhanced data rate Up to 3.0 Mbit/s over the air
Connection No less than 10 m (32.8 ft) line of sight
Bluetooth version 2.0 + EDR
Operating Frequency 2.402 to 2.480 GHz
Data Collection Settings
Data Collection for Tethered Scanner
Setting
Default Value
Tethered-Configure On Connect Overwrite with computer
settings
Enable USB Scanner Auto-Detect Off
Enable Scanner Port Off