manualshive.com logo in svg

Honeywell Thor CV41, Руководство пользователя, Страница: 2 / 118

Поделиться
Скачать
Honeywell Thor CV41 Скачать руководство пользователя страница 2

ii

CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other infor-
mation contained in this document without prior notice, and the reader should in all cases consult HII to 
determine whether any such changes have been made. The information in this publication does not rep-
resent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or 
consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims 
all responsibility for the selection and use of software and/or hardware to achieve intended results.

This document contains proprietary information that is protected by copyright. All rights are reserved. No 
part of this document may be photocopied, reproduced, or translated into another language without the 
prior written consent of HII.

Copyright 

 2013-2018 Honeywell International Inc. All rights reserved.

Web Address: 

ww.honeywellaidc.com

Microsoft®, Windows®, ActiveSync®, MSN, Outlook®, Windows Mobile®, the Windows logo, and Windows 
Media are registered trademarks or trademarks of Microsoft Corporation in the United States and/or 
other countries.

Wi-Fi®, WMM®, Wi-Fi Mutlimedia™, Wi-Fi Protected Access®, WPA™, WPA2™ and the Wi-Fi CERTIFIED™ 
logo are trademarks or registered trademarks of Wi-Fi Alliance.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.

Laird Technologies, the Laird logo, Summit Data Communications, the Summit logo, and “Connected. No 
Matter What” are trademarks of Laird Technologies, Inc.

Verizon® is a registered trademark of Verizon Trademark Services LLC.

SD and SDHC are trademarks or registered trademarks of SD-3C, LLC in the United States and/or other 
countries.

Other product names or marks mentioned in this document may be trademarks or registered trademarks 
of other companies and are the property of their respective owners.

For patent information, refer to 

www.hsmpats.com.

Содержание Thor CV41























































































































Отзывы:

Нет отзывов