manualshive.com logo in svg

Honeywell Thor CV41, Руководство пользователя, Страница: 26 / 118

Поделиться
Скачать
Honeywell Thor CV41 Скачать руководство пользователя страница 26

18

CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide

Enable the Defroster

If your CV41 contains a defroster, use it to help reduce condensation on an external sur-
face when the computer is moving between sub-freezing and normal temperatures.

1. Tap 

Start

 > 

Control Panel

 > 

Screen

. The Screen Control screen appears.

2. Select 

Enable Defroster

.

3. In 

Trip Point

, set the temperature tripping point in degrees Celsius. When the 

temperature reaches the trip point, the heater automatically turns on.

4. Tap 

OK

.

Change the Volume

Change the CV41 volume to suit your needs and the environment.

1. On the keypad, tap 

ALT

 to enable the secondary keys.

2. Tap 

F9

 to increase volume or 

F10

 to decrease the volume.

3. Repeat Steps 1 and 2 to increase or decrease volume.

About the CV41 Radio Antennas

The CV41 comes equipped with an 802.11 radio and can be ordered with internal or 
external antennas. When the CV41 is ordered with internal 802.11 antennas, the exter-
nal 802.11 antenna connectors are not used. GPS and WWAN are optional on the CV41 
and require externally mounted antennas.

Connect an External Antenna

Use this section to learn how to connect an external radio antenna to the CV41. You can 
purchase 802.11, GPS, or WWAN antennas to mount onto a wall, forklift, or other flat 
surface. For more information on ordering an antenna, contact your Honeywell repre-
sentative.

1. Using your own hardware, secure the external antenna to a wall, forklift, or other flat 

surface.

2. Secure the antenna to one of the antenna plugs on the CV41.

Caution:  If the CV41 has connectors for external antennas, do not power 

up the CV41 without the external antennas connected. 
Damage to the WLAN radio may result.

Содержание Thor CV41























































































































Отзывы:

Нет отзывов