manualshive.com logo in svg

Honeywell Thor CV41, Руководство пользователя, Страница: 66 / 118

Поделиться
Скачать
Honeywell Thor CV41 Скачать руководство пользователя страница 66

58

CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide

About WWAN Communications

The CV41 Vehicle Mount Computer has an optional WWAN radio that supports both 
CDMA and UMTS cellular technology. Use either one of these technologies to transmit 
data through cellular wide-area networks. To configure and activate CDMA and UMTS 
connections, use the Honeywell OneClick Internet application.

Honeywell OneClick Internet Application Main Screen

About the Status Buttons and Icons

Tappable buttons and icons in the Honeywell OneClick Internet application immedi-
ately shows you the status of your WWAN connection. Some buttons or icons may also 
launch your default web browser, SMS, and email applications.

OneClick Internet Status Buttons and Icons  

Icons

Description

Displays your WWAN signal strength.

Connected to WWAN. Tap the button to turn off the radio.

Attempting to connect to WWAN.

Ready to connect to WWAN. Tap the button to connect.

The WWAN radio enabled. Tap this button to disable the radio.

The WWAN radio is attempting to connect or it has been disabled.

The WWAN radio is disabled. Tap this button to enable the radio.

The WWAN radio is ready to connect.

The WWAN radio is attempting to establish a connection to 
WWAN.

Содержание Thor CV41























































































































Отзывы:

Нет отзывов