Honeywell TELEPHONE ACCESS MODULE W8735D Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 36

Honeywell TELEPHONE ACCESS MODULE W8735D Скачать руководство пользователя страница 35

35

69-2028—01

1-YEAR LIMITED WARRANTY

Honeywell warrants this product, excluding battery, to be free
from defects in the workmanship or materials, under normal
use and service, for a period of one (1) year from the date of
purchase by the consumer. If at any time during the warranty
period the product is determined to be defective or
malfunctions, Honeywell shall repair or replace it (at
Honeywell's option).
If the product is defective,

(i) return it, with a bill of sale or other dated proof of

purchase, to the place from which you purchased it; or

(ii) call Honeywell Customer Care at 1-800-468-1502.

Customer Care will make the determination whether
the product should be returned to the following
address: Honeywell Return Goods, Dock 4 MN10-
3860, 1885 Douglas Dr. N., Golden Valley, MN 55422,
or whether a replacement product can be sent to you.

This warranty does not cover removal or reinstallation

costs. This warranty shall not apply if it is shown by
Honeywell that the defect or malfunction was caused by
damage which occurred while the product was in the
possession of a consumer.

Honeywell's sole responsibility shall be to repair or replace

the product within the terms stated above. HONEYWELL
SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF
ANY KIND, INCLUDING ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR
INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY,
EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF
THIS PRODUCT. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so this
limitation may not apply to you.

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY

HONEYWELL MAKES ON THIS PRODUCT. THE
DURATION OF ANY IMPLIED WARRANTIES, INCLUDING
THE WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO
THE ONE-YEAR DURATION OF THIS WARRANTY. Some
states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may

have other rights which vary from state to state.

If you have warranty questions, please write Honeywell

Customer Relations, 1985 Douglas Dr., Golden Valley, MN
55422 or call 1-800-468-1502. In Canada, write Retail
Products ON15-02H, Honeywell Limited/Honeywell Limitée,
35 Dynamic Drive, Toronto, Ontario M1V4Z9.

«
...
33
34
35
36
»

Содержание TELEPHONE ACCESS MODULE W8735D





































Отзывы:

Нет отзывов