Honeywell TELEPHONE ACCESS MODULE W8735D Скачать руководство пользователя страница 16

Страница: 16 / 36

69-2028—01

To return to the Main menu, press the * key.

If needed, use the “Limit Menu”

on page 23 to change the

values of the temperature and

humidity alert limit settings.

Call and Ring Menu

Press 5 from the Main menu to select the Call and

Ring Menu. From this menu you can set the number

of rings required for the Telephone Access Module to

answer your call, set your TAM’s home number, and

set the alert phone numbers for your main, backup,

and contractor dial-out numbers. You can also set the

dial-out sequence of numbers to be called when an

alert occurs.
The Telephone Access Module stores up to four

telephone numbers; your home number (required),

the your main dial-out number, a backup dial-out

number, and the contractor’s dial-out number. Each

telephone number can be a maximum of 25 digits in

length. See Table 3 on page 21 for the dial-out

procedure specific to the phone numbers configured.

IMPORTANT

If the main, backup, or contractor numbers are

not programmed, a dial-out can not be initiated

on an alert condition.

Once you are at the Call and Ring Menu, you hear:

“

Call and ring menu.

Press 1 to set number of rings.

Press 2 to set home telephone number.

Press 3 to set main telephone number.

Press 4 to set backup telephone number.

Press 5 to set contractor telephone number.

Press 6 to set dial-out sequence.

Press 9 to repeat this menu.

Press star (*) key to return to the main menu

.”

Table 2. Factory Default Alert Levels.

Alert

Factory Alert Level

Indoor Low Temperature Limit

High

Indoor High Temperature Limit

High

Outdoor Low Temperature Limit

High

Outdoor High Temperature Limit

High

Humidity Low Limit

High

Humidity High Limit

High

System Failure

High

Power Outage

High

Air Filter

Low

Auxiliary Input

High

Low Battery

Low

Pass Code Change

High

Содержание TELEPHONE ACCESS MODULE W8735D





































Результаты поиска

Содержание TELEPHONE ACCESS MODULE W8735D

Отзывы:

Honeywell TELEPHONE ACCESS MODULE W8735D, Руководство пользователя, Страница: 16 / 36

Результаты поиска

Содержание TELEPHONE ACCESS MODULE W8735D

Отзывы: