24
69-2028—01
Indoor Temperature Low Limit Setting
The Indoor Temperature Low Limit setting is used to
activate an alert when the displayed temperature on
the thermostat is lower than the value you set. The
setting range is 40° F (4° C) to 99° F (37° C) in 1°
increments. The factory default setting is 50° F
(10° C).
When a thermostat displays a temperature lower than
your low limit setting and your dial-out alert is active,
the TAM dials out.
CAUTION
Property Loss Hazard.
Do not assume your designate received
and acted on the active alert.
Prepare to act promptly; time may be critical.
CAUTION
Property Loss Hazard.
Do not rely only on the Telephone Access
Module to identify potential problems in
your home (like detecting low room
temperatures that can freeze water pipes).
Have someone periodically check your home
while you are away.
Set the Low limit setting a few
degrees below the set-back
setting on your thermostat. This
way you can be notified if the
temperature drops below your
low thermostat setting. This
provides an early notice.
If your indoor low limit setting is set to the factory
setting, you hear “
The low limit setting is 50° F
(°10 C)
.”
If the indoor low limit setting is the value you want,
press the * key to return to the Main menu.
CHANGING THE INDOOR TEMPERATURE LOW LIMIT
SETTING
1.
You hear “
To change the low limit setting, press 1
.”
2.
Press 1.
• You hear “
Enter the low limit setting followed by
the # key
.”
3.
Enter a Low Limit Setting from 40° F (4° C) to
99° F (37° C) in 1° increments and press
the # key.
• You hear “
Your low limit setting is (your low limit
setting)
.”
4.
If this is the low limit setting you want
programmed, press the * key to return to the Main
menu.
If the indoor low limit setting is not entered correctly,
you hear “
Invalid setting
.” Follow the instructions
above to enter a new indoor low limit.
80
90
70
60
90
80
70
60