Honeywell TB7200 Series Скачать руководство пользователя страница 13

Страница: 13 / 52

WIRELESS INSTALLATION & INTEGRATION REFERENCE GUIDE FOR TB7200/TB7300/TB7600 SERIES THERMOSTATS

63-4522—02

Installing the Honeywell Wireless Communication Card

The Honeywell wireless card (TB-VWG-APP-1014) and related Honeywell TB7200, TB7300, and TB7600 wireless thermostats

use ZigBee/IEEE 802.15.4 physical layer for communication. The WEBs-AX controller with the wireless communication card acts

as network coordinator device for the IEEE 802.15.4/ZigBee network used with the Honeywell wireless thermostats.

A recommended typical maximum of:

•

wireless thermostats can be supported by a single WEB-2xx controller

•

wireless thermostats can be supported by a single WEB-600 or WEB-700 controller

The theoretical maximum of number of thermostats supported by a single WEBs controller is dependent on the resources

available for the WirelessTstatNetwork driver .jar file and the extent of integration added to the station itself. When additional

functions and services are added to the station, the available resources for the driver will be less. Once you have configured the

station for the wireless network and all other features (graphics, services, histories, alarms, etc.), you should monitor the

resources so that they do not exceed the recommended limits for each specific platform.

Refer to the

Wireless Communication Card for TB7200/7300/7600 Installation Instructions

supplied with the TB-VWG-APP-1000

communication card for detailed information on how to install the wireless communication card in a WEBs-AX controller.

Fig. 17. Wireless communication card.

NOTE: The wireless communication card must be installed in option slot 1 on WEB-2xx and WEB-6xx controllers and installed

in either option slot 1 or slot 2 on a WEB-7xx controller.

Содержание TB7200 Series





















































Результаты поиска

Содержание TB7200 Series

Отзывы:

Похожие инструкции для TB7200 Series

Бренды по названию

Популярные бренды

Honeywell TB7200 Series, Беспроводная установка и интеграция: Руководство по эксплуатации

Результаты поиска

Содержание TB7200 Series

Отзывы:

Похожие инструкции для TB7200 Series

Бренды по названию

Популярные бренды