5
Program schedule overrides
AM
AM
Heat On
Hold Until
Menu
Fan
Mode
Fan
Auto
Mode
Heat
AM
AM
Hold Until
Permanent Hold
Run Schedule
Back
AM
AM
Heat On
Hold Until
Menu
Fan
Mode
Fan
Auto
Mode
Heat
AM
AM
Hold Until
Permanent Hold
Run Schedule
Back
If the thermostat is included in Z-Wave network it typically follows the setting on your
Z-Wave controller. If you adjust the temperature setting, it overrides the current setting
until new state (eg. Home/Away) and/or the new temperature setting is received from
Z-Wave controller. Setting of Hold until time and Permanent hold (see below) will not
be available on the thermostat screen at this time.
There are several scheduling options available for the thermostat. For more
information, see "Scheduling options" on page 12.
If the thermostat is not included in Z-Wave network and the thermostat is following
local time based schedule only, you can set what time the new temperature setting will
be held until or you can hold the new temperature setting permanently.
Program schedule override (temporary)
1 Touch or
on the thermostat home
screen to set your desired temperature. Hold
Until will appear together with the time the
hold will end.
2 To change when the hold will end, touch
Hold
Until
and wait until the time starts blinking.
Then, touch or
to set when you want
the hold to end. Touch
Hold Until
once more
to confirm changes and return to the home
screen.
After the hold period ends, the thermostat will
automatically return to the program schedule. If
you want to cancel the hold, touch
Hold Until
and
then touch
Run Schedule
.
Program schedule override
(permanent)
1 Touch or
on the thermostat home
screen to reach your desired temperature.
Hold Until
will appear together with the time
you want the hold to end.
2 Touch
Hold Until
. Permanent Hold will appear
on screen. Touch
Permanent Hold
to hold this
temperature until you manually change it.
To end permanent hold and return to the
program schedule, touch
Permanent Hold
and then
touch
Run Schedule
.
