7
PrOGrAmmING YOUr ST9100S
reviewing the Programme Times
To review your programme, move the slider to the
PrOGrAmme
position.
To review the programme times, press the
button repeatedly. The appropriate
ON
and
OFF
markers will be displayed to show you which time is being reviewed.
Any of these times can be adjusted by using the
or
buttons, and then
confirmed using the
button. Remember to return the slider to the
rUN
position
after reviewing is complete.
modifying the Programme
The programme has two pairs of
ON/OFF
switching times per day. Each time can be
set between 3.00 am and 2.50 am (on the next day) to allow you to programme the
system to stay on past midnight, if required.
a.
Move the slider to the
PrOGrAmme
position. ‘SET PROGRAMME’ will show
briefly to verify this action.
b.
‘SET ON-TIME 1’ will then be displayed and the time setting for the first
ON 1
time
will now be flashing to indicate it can be changed. If you do not wish to change
the time, press the green button and move to the next step. If you do wish to
make a change, use the or buttons to change the first
ON 1
time. Each
press of the button will change the time by 10 minutes. As soon as the time has
been changed, the message ‘ON-TIME 1 OK?’ will be displayed. Press the green
button to confirm the time is correct and move to the next step. ‘SAVED’ will be
displayed for a moment to confirm that any change has been saved to memory.
DAY/TIME
PROGRAMME
RUN
