6
PrOGrAmmING YOUr ST9100S
The Built-in Programmes
The built-in programmes give you a starting point that you can personalise to your
own requirements. Your Installer should have selected one and ticked the box
alongside it. If there is no tick, the product normally leaves the factory with Profile A
installed, but it is a simple matter to select one of the other profiles (see
Changing
the Installer Parameters
, page 12).
Your Personal Programme
The table below has been left blank for you to record your own personal programme.
For ease of use, your ST9100S is supplied as standard with only 2 on/off’s enabled. To
enable ON/OFF period 3 see
Fine Tuning your ST9100S
(page 12).
ON 1
OFF 1
ON 2
OFF 2
ON
OFF
Built-in Programme (Profile C)
ON 1
OFF 1
ON 2
OFF 2
ON
OFF
6:30am
7:30am
5:00pm
10:00pm
Not used
Not used
Built-in Programme (Profile b)
ON 1
OFF 1
ON 2
OFF 2
ON
OFF
6:30am
9:30am
4:30pm
11:00pm
Not used
Not used
Built-in Programme (Profile A)
ON 1
OFF 1
ON 2
OFF 2
ON
OFF
6:30am
8:30am
4:30pm
10:30pm
Not used
Not used
