Honeywell SC500, Руководство пользователя

Страница: 63 / 150

SC Series Instruction Manual - Model SC500 page 63
Str
ain
-G
ag
e In
pu
t C
han
ne
l
10
When using the 3-Point Known Load Calibration type, the following menu items
are available:
• “
KNOWN POINT 1/3
”: point 1 of 3, usually 0% of the transducer’s full-scale capac-
ity.
• “
KNOWN POINT 2/3
”: point 2 of 3, usually 50% of the transducer’s full-scale capac-
ity.
• “
KNOWN POINT 3/3
”: point 3 of 3, usually 100% of the transducer’s full-scale
capacity.
When using the 5-Point Known Load Calibration type, the following menu items
are available:
• “
KNOWN POINT 1/5
”: point 1 of 5, usually 0% of the transducer’s full-scale capac-
ity.
• “
KNOWN POINT 2/5
”: point 2 of 5, usually 25% of the transducer’s full-scale capac-
ity.
• “
KNOWN POINT 3/5
”: point 3 of 5, usually 50% of the transducer’s full-scale capac-
ity.
• “
KNOWN POINT 4/5
”: point 4 of 5, usually 75% of the transducer’s full-scale capac-
ity.
• “
KNOWN POINT 5/5
”: point 5 of 5, usually 100% of the transducer’s full-scale
capacity.
These menu items are only available with the Known-Load Calibration types.
NOTICE
To insure both correct operation of the transducer and application of the load,
the instrument expects the voltage applied at each known-load point to be
increasing. For example, the load applied at Known-Load Point 2/2 must
cause the transducer to produce a more positive voltage than at Known-Load
Point 1/2.