background image

 

NOTIFIER ITALIA S.r.l.

 

A socio unico - 20097 San Donato Milanese (Ml) - Via Grandi, 22 - Tel.: 02/518971 - Fax: 02/5189730 - Capitale Sociale 

 

2.700.000,00 i.v. - C.C.A.A.  1456164 - Trib.  Milano  Reg. Soc. 348608 - Vol. 8549 Fasc. 8 - Partita IVA IT 11319700156 
(informativa privacy art. 3 Digs 196/03).

 

UFFICI REGIONALI: 

10151 Torino - Via Pianezza, 181 - Tel.: 011/4531193 - Fax: 011/4531183 - E-mail: [email protected] - 35010 Limena (PD) 
Via IV Novembre, 6/c int.9 - Tel.: 049/7663511 - Fax: 049/7663550 - E-mail: [email protected] - 40050 Funo  di Argelato 
(BO) - Asta Servizi, Bl. 3B, Gall. B n. 85, Centergross - Tel.: 051/864855 - Fax: 051/6647638 - E-mail: [email protected] – 
50136   Firenze - Via Telesio, 15 - Tel.: 055/696706 – Fax: 055/6529294 - 00118 Roma - Via Del Casale  Santarelli, 51 - Tel.: 
06/7988021 - Fax: 06/79880250 - E-mail: [email protected] - 80143 Napoli – Via G.Porzio,4 Centro Direzionale. Isola E2, 
Scala B, Piano 5°, int.19 - Tel.: 081/7879398 - Fax: 081/7879159- E-mail: [email protected] - 70125 Bari - Via Della 
Costituente, 29 - Tel.: 080/5013247 - Fax: 080/5648114 -  E-mail:    [email protected] - 95126 Catania - Via Alcide De 
Gasperi, 187 - Tel.: 095/7128993 - Fax:  095/7120753 - E-mail:  [email protected]

            

20097 

  Tel: 

02/518971 

San Donato Milanese  Fax: 02/5189730 
(MILANO)  

www.notifier.it 

Via Grandi, 22   

E-mail: [email protected]
A Honeywell company

 

 Every care has been taken in the preparation of this data sheet but no liability can be accepted for the use of the information therein. Design features may be changed or amended without prior notice.

 

M-185.1-

LCD6000

A-E

N

G Rev

 A.1

 03

/2010 

Содержание NOTIFIER LCD6000A

















Отзывы: