manualshive.com logo in svg

Honeywell Notifier 020-558, Руководство пользователя

Поделиться
Скачать
Honeywell Notifier 020-558 Скачать руководство пользователя страница 135

ID3000/ID2000 Fire Panel Configuration Tool Manual

Historic Log

A1 - 2

997-291, Version 3.05

November 2010

Historic and Data Log Window

This window has the following areas:

a. Menus, described on the following pages.

b. Icons which provide quick access to the

majority of menu options. See below.

c. Status display area. This shows whether the

Tool is communicating with (connected to)
the panel, and what requests have been
made to the panel via the Tool’s menus and
icons.

d. Data display area. This shows the historic

log and data log contents that have been
extracted from the panel via the Tool.

e. Menu available using the right-hand mouse

button. This allows data to be selected,
copied, cut, and pasted. The options
available depend on previous selections (e.g.
paste is only available when data has been
copied). It is also possible to select data by
dragging the mouse across it. Selected data
can be pasted into other PC applications.

a

b

c

d

e

Содержание Notifier 020-558




















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды