42
• Connect the MPA1C1 to an external 12VDC PSU, eliminating
the use of PoE.
• Connect the MPA1C1 panel to the power injector or PoE
switch with the shortest possible Ethernet cable length.
Mechanical dimensions
Environment
•
Temperature:
32° to 104° F (0° to 40° C) if PoE powered; 32°
to 120° F (0° to 49° C) if powered from external 12VDC Power
supply.
•
Humidity:
5% to 85% RHNC.
For Canada
:
•
Humidity:
93+/-2% at a temperature of 32+/-2°C.
• Indoor dry.
MPA1C1 Controller
Height = 3.95” (100mm)
Width = 1.78” (45mm)
Depth = 1.1” (28mm)
The Controller is designed to fit in a
single gang US junction Box
MPA1ENCP Plastic
Enclosure
Height = 5.51” (140mm)
Width = 7.09” (180mm)
Depth = 1.7” (43mm)
MPA1P MPA1 Kit in
Plastic Enclosure
Height = 5.51” (140mm)
Width = 7.09” (180mm)
Depth = 1.7” (43mm)
Содержание MPA1C1
Страница 4: ...3 Introduction This document describes how to install the MPA1C1 access control unit ...
Страница 8: ...7 MPA1C1 door with single reader and door strike MPA1C1 door with two readers and door strike ...
Страница 17: ...16 Note The MPA1C1 Controller has been installed already in the MPA1ENCP enclosure ...
Страница 23: ...22 Take out the inner base and turn it facing the labels toward you and snap in the MPA1C1 panel ...
